Sunday, May 10, 2009

Lipoma And Homeopathy

Exercise 1 GIS and coordinate systems using the example of Gauss-Krüger system

first What is a Ellipsoid?

Ein Ellipsoid ist die höher dimensionale Entsprechung einer Ellipse. Ein Ellipsoid im dreidimensionalen Raum kann als affines (also gestrecktes oder gestauchtes) Bild einer Sphäre (d. h. Kugeloberfläche) erklärt werden. Es werden kartesische Koordinaten und Ausrichtungen der Koordinatenachsen x, y und z nach den Symmetrieachsen des Ellipsoids verwendet.



http://de.wikipedia.org/wiki/Ellipsoid





second As the name of the ellipsoid is used in the GK system?

The name of the ellipsoid, which is used in the GK system is the Bessel or Krassowski ellipsoid.

http://de.wikipedia.org/wiki/Gau% C3% 9F-Kr% C3% BCger coordinate system






third What is the difference between geographic and projected Cartesian coordinates?

A Cartesian coordinate system is an orthogonal, rectangular coordinate system the coordinates of straight lines at a constant distance sind.Mit the geographical coordinates (latitude and longitude) can describe the position of a point on the earth. The earth is divided in 360 degrees of longitude and 180 degrees of latitude.

http://de.wikipedia.org/wiki/Geographische_Koordinaten

A Cartesian, projected coordinate system is an orthogonal coordinate system. Orthogonal Coordinates: cutting at any point in space the three coordinate lines vertically in pairs, it is called an orthogonal Koordinatensystem.Beispiel: Gauss-Krüger coordinate system differences: geographic coordinates are in Degrees and minutes stated, Cartesian coordinates, however, are determined metric.

http://de.wikipedia.org/wiki/Krummlinige_Koordinaten # Special case: _Orthogonale_Koordinaten






4th What is the Gauss-Krüger projection system based on?

The Gauss-Krüger system belongs to the genus of the transverse Mercator projection. The Mercator projection, cut in the meridian and latitude lines perpendicular, is neither equidistant nor equal area, however, angle-preserving. After the poles the distortion is rampant, why Mercator projections usually reach only to 70 º or 80 º north or south latitude.

http://www.basilautzkis.de/downloads/gausskruegersystem.pdf



5th What advantages does a Cartesian coordinate system?

It can be described many geometrical situations and you have the opportunity to lösen.Weiterhin geometric problems mathematically spatial structure thanks to a third Axis (z-axis are shown.

http://de.wikipedia.org/wiki/Kartesisches_Koordinatensystem



6. Um welche Einheiten handelt es sich bei GK-Koordinaten?

Die Rechts- und Hochwerte werden in der SI-Einheit Meter angegeben (metrische Einheit).

http://de.wikipedia.org/wiki/Gauß-Krüger-Koordinatensystem



7. Was versteht man in diesem Zusammenhang unter dem Begriff „Meridian“?

Der Meridian bezeichnet in der Geographie einen halben Längenkreis auf der Erdoberfläche, der von einem geographischen Pol zum anderen verläuft.Das Gitternetz der geographischen Koordinaten wird in 3° breite Meridianstreifen aufgeteilt (eine Einteilung in 6° wird auch angewendet). Jeder Meridianstreifen geht vom Nord- bis zum Südpol parallel zu seinem sog. Mittelmeridian. Die Mittelmeridiane benachbarter Meridianstreifen liegen demnach 3° (bzw. 6°) auseinander. Jeder Meridianstreifen erhält eine Kennziffer (nur beim Gauß-Krüger-Meridianstreifensystem mit 3°-Streifen). Diese leitet sich aus der Gradzahl des Mittelmeridians (0°, 3°, 6°,...) ab.

http://de.wikipedia.org/wiki/Gauß-Krüger-Koordinatensystem



8. Warum werden im GK-System sog. Meridianstreifen verwendet?

Die Abbildung der Ellipsoiden in the plane is not possible without distortion. The image of a ball-like surface on the plane, it is inevitable distortions with it. Length along a meridian is true to the picture, with increasing distance from the meridian is growing but the error. At the overlapping points of each meridian strip systems, the Gauss-Krüger coordinates are matched. Two adjacent strips overlap by 20 minutes (about 23km). Here, the same coordinate values \u200b\u200bare given in both zones. The track bias at about 100km strip extension is less than 12cm at a distance of 1 km, which can be neglected in many cases. Distortions are kept to very low.

http://www.geodaten.bayern.de/bvv_web/downloads/tipps_Erde.pdf



9th How to recognize the code used in the GK-strip to a coordinate?

Each principal meridian has its own identification number. This ratio is calculated by dividing the number of degrees of the main meridian by three (eg for the main meridian 9 ° E., the key figure 3, the main meridian 12 ° E., the key figure 4). You can see the code at the first number of the coordinate.

http://www.basilautzkis.de/downloads/gausskruegersystem.pdf



10th Which formula is most easily of the central meridian of any GK-strip charge?

The Central Meridian is clear (east of Greenwich) from the formula:
ZM = ((zone number - 30) * 6 °) - 3 ° east

For the Western Hemisphere is:
ZM = ((30 - zone number) * 6 °) + 3 ° west

http://www.olanis.de/knowhow/mapprj/mapprj8.shtml



11th Translate the terms "Easting" and "Northing" in the current context.

Easting - Easting (x-coordinate in a plane coordinate system)
Northing - High value (y-coordinate in a plane coordinate system)

http://de.wikipedia.org/wiki/Hochwert # Northing




12th What is meant by the terms "False Easting and False Northing"?

of positions in the northern hemisphere is the source identified as "false easting" 500,000 and "false northing" of 0 For positions in the southern hemisphere the origin is defined as "false easting "500,000 and" false northing "of 10,000,000.

http://www.geoinformatik.uni-rostock.de/einzel.asp?ID=1719






13th Are False Easting and False Northing "used in the GK system?

The natural source of the coordinate system is found generally in the intersection of the central meridian with the equator. In rare cases, a Ursprungslatitude (Latitude of Origin) is given, the intersection of the central meridian, together with the Latitude of natural origin. Dieser wird häufig mittels eines X- und/oder Y-Offsets verschoben, um z.B. negative Rechts-/Hochwerte zu vermeiden (in unterer Grafik als X0 und Y0 bezeichnet, in englischer Literatur meist False Easting und False Northing). Diese Offset-Werte spielen sowohl im UTM-System als auch bei den Deutschen Gauß-Krüger-Koordinaten eine.Da Deutschland in der nördlichen Hemisphäre liegt, kommt hier nur das „False Easting (500 000) vor.

http://www.olanis.de/knowhow/mapprj/mapprj5.shtml



14. Erläutern Sie kurz die Abkürzungen „OGC“, „SRS“ und „EPSG Code“.

The Open Geospatial Consortium (OGC) is a nonprofit organization founded in 1994, has set itself the goal of the development of spatial information processing (especially spatial data) based on common standards for interoperability set.

http://de.wikipedia.org/wiki/Open_Geospatial_Consortium

Spatial Reference System (SRS) is a projected or geographic coordinate system.

http://www.geoinformatik.uni-rostock.de/einzel.asp?ID=-43809376

EPSG code:
The European Petroleum Survey Group Geodesy (EPSG), eine Arbeitsgruppe der europäischen Öl- und Gaserkundungsfirmen, wurde 1986 gegründet. 2005 wurde sie durch das Surveying and Positioning Committee der International Association of Oil & Gas Producers (OGP) abgelöst. Die EPSG ist bekannt geworden durch den Aufbau ihres Systems von weltweit eindeutigen 4- bis 5-stelligen Schlüsselnummern für Koordinatenreferenzsysteme (EPSG-Codes), das unter gleichem Namen von der Nachfolgeorganisation OGP weitergeführt wird.

http://de.wikipedia.org/wiki/European_Petroleum_Survey_Group_Geodesy



15. Welche „EPSG Codes“ werden in Deutschland (When using the GK system) used?

In Germany, uses the following EPSG codes:

31 466 to 31 467 for
DHDN Zone 2 Zone 3 DHDN
31 468 31 469
for DHDN Zone 4 Zone 5 for DHDN

http://de.wikipedia. org / wiki / European_Petroleum_Survey_Group_Geodesy


0 comments:

Post a Comment